The German Military Handgun Forum

Welcome to
ParallaxBill's
Milsurpshooter.Net
Curio or Relic & Military Surplus
Collector's and Shooter's Forums

About this site

C&R Dealer Links	General Related Links
The Member's Map	The Gun Control Forum

Due to the main focus of this site on the collecting and shooting
of C&R and military surplus firearms in their collectible original configurations,
sporterising topics will not be permitted in these fourms.
Thankyou,
ParallaxBill

Parallax's Trader Boards
See the new location at the bottom of the forum list
**Membership applications no longer required to post but you still must be registered.**
No dealers please!

Back in Production, New and Improved
Darrell's Scout Mount Page & Forum

Finnish M-91/30 photo courtesy of ParallaxBill

Click on the picture for current availability and prices

0 Kudo

Add Reply New Topic

<< Previous Topic Next Topic >>

Luger repair problem for gunsmiths

Author	Comment
boikman	Luger repair problem for gunsmiths	Lead	[-]
Posts: 323 (01/11/09 07:38 PM) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts Report Post	Tags : None Here is the problem: The gun would not cycle on the first round after firing........the main spring pressure was reduced,thus allowing the gun to cycle ,eject and put next round into battery...but....the firing pin would not catch,so could not fire the next round. Does anyone have a solution or can identify the problem on this lil jewel. Thanking you in advance for your help, boikman
Colin		#1	[-]
Posts: 1843 (01/12/09 01:09 AM) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts Report Post	Possibly ammo that is weaker than German service ammo isn't providing enough recoil energy to run the bolt back far enough so the sear can catch the firing pin in the bolt. Or it might be a problem with the freedom of movement of the discommector plunger in in the sear bar.
dfariswheel		#2	[-]
Posts: 904 (01/12/09 08:59 PM) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts Report Post	Worn, broken, defective firing pin or sear bar?
boikman	solved !	#3	[-]
Posts: 324 (01/20/09 09:47 PM) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts Report Post	A small misalignment problem...too technical for even me to explain,but at least everything works now......

<< Previous Topic Next Topic >>

Add Reply

Quick Reply