Thanks,
Tom
[Surplus Rifle.Com's New Article:]
Slug, Measure, & Match: Using the Right Bullet for the Right Barrel Diameter
By Mark Trope & R. Ted Jeo
| About this site |
|---|
| C&R Dealer Links | General Related Links |
| The Member's Map | The Gun Control Forum |
Due to the main focus of this site on the collecting and shooting
of C&R and military surplus firearms in their collectible original configurations,
sporterising topics will not be permitted in these fourms.
Thankyou,
ParallaxBill
Parallax's Trader Boards
See the new location at the bottom of the forum list
**Membership applications no longer required to post but you still must be registered.**
No dealers please!
Back in Production, New and Improved
Darrell's Scout Mount Page & Forum
| Author | Comment | ||
|---|---|---|---|
TommyKid |
Newbie Question...black or smokeless? |
Lead | |
|
I'm going to be doing some reloading in the future. I currently have a Swede rolling block and a Martini MkIV and Springfield Trap Door are on my wish
list. Would there be any benefit to a new re-loader in using smokeless over black powder or vice verse? Is one easier to work with? Safer to work with? Or
better for a newbie to work with? I eventually would like to shoot black powder loads out of these guns, but wasn't sure if this would be a good starting
point for me.
Thanks, Tom |
|||
shotout |
|||
|
First off I would recommend getting a couple good reloading manuals. If you think you will be loading Black go ahead and get that manual also.
The reason I started with smokeless is that is what Kind of rifle I have. I would think the safety cautions would be the same when using the components for either. Please don't start reloading with out reading at least two or maybe more manuals, several times each. Once you start reloading, continue to read, again and again. And then some more. hope this helps. shotout, aka skd. |
|||
TommyKid |
|||
|
I don't even have any of the equipment, so all I can do is read right now. Thanks for the help, Tom |
|||
akitaholic |
|||
|
Smokeless is safer to handle and less work to clean up after. You can load smokeless in reduced loads (using the right powders) to pressure levels that will be
safe in blackpowder guns. One thing to keep in mind is that the oldies have softer steel in the barrels, so cast bullets are preferable to minimize barrel
wear.
'holic |
|||
doug henry |
|||
|
You friends are an invaluable source for reloading experience and guidance.
Definitely get a couple of reloading manuals and do as shotout stated. Two of my favorite smokeless powder manuals are Lymans and Lee. Both have sections on reloading, equipment and background information, Lyman also publishes black powder reloading manuals. A wealth of information to learn from. Black powder rifles are safe and accurate with smokeless powder loads with an appropriate powder, charge and bullet. I reloader for a Trapdoor and Martini-Henry with excellent results. It's interesting to load black powder for the experience but as it is a mess to cleanup. Question to the Forum: There is Pyrodex and what is the name of the another Back Powder equivalent smokeless powder on the market? |
|||